Fluoroplastics:Kalenron® PTFE

0044-7894 685 275
Home » Fluoroplastics » Kalenron® PTFE
Kalenron® PTFE

Material Introduction

PTFE comes with unbelievable chemical resistance against almost all chemicals except for some fluorides and molten alkali metals. This thermoplastic polymer is the most initial type of fluoroplastics and has the most extensive applications.

This fluorocarbon solid is fitted with excellent self-lubricating capacity. As a result, our PTFE sheet and rod are well-suited for manufacture of corrosion resistant base plates and hermetic materials.

Standard Sizes

Type Thickness(mm) Width × length (mm)
PTFE skived sheet 0.5 to 3 Width:300mm/1000mm
PTFE Molded Sheet 4 to 80
85 to 100
500*500/600*600/1000*1000/ 1200*1200/1500*1500
500*500/600*600

Type Diameter(mm) Length(mm)
PTFE Rod 4 to 200 1000

Colors include: White, Black

Grades include: PTFE+ GF, PTFE+MoS2, PTFE+Graphite, PTFE+ Bronze

Note
1. Other choices of sizes, colors and grades are customizable.
2. Length, width, thickness and diameter tolerance are slightly different due to inevitable error occurred in production process.

Material Strength

1. Prominent flame retardance with limiting oxygen index below 90
2. Low coefficient of friction
3. Non-stick properties and self-lubrication
4. Outstanding resistance to temperature ranged from -200°C to 260°C
5. Excellent electrical insulation
6. Remarkable resistance against weather and aging
7. High gas permeability
8. Good physiological safety, bio compatibility and preventing thrombosis

Material Application

1. Corrosion resistant materials used for chemical vessel and parts such as tank, reaction kettle, lining, valve, pump body, connector, filter material and parting application
2. Abrasion resistant parts such as static and dynamic O-ring, piston ring, washer, valve support, bearing, bearing pad, sliding block and guide rail, etc.
3. Products resistant to thermal, high frequency electricity and electric arc, such as high frequency cable, moisture resistant cable and capacitor, etc.
4. Graft materials such as artificial blood vessel, artificial heart, artificial esophagus, artificial peritoneum, artificial heart and lung dialysis membrane, as well as all kinds of cannulas and catheters, etc.
5. Non-stick coating materials for all kinds of non-stick cookware and non-stick rollers for food manufacture equipment

Material Type

PTFE sheet, rod, tube

PTFE added various ingredients properties

Brand product name Product number Product manual Performance and application
Kalenron® PTFE KL-V1 Slab tube and shaped parts made of PTFE pure material
100% modified PTFE KL-MP Modified PTFE, good fluidity, suitable for PTFE general molding, automatic molding, isostatic molding, thin-walled parts, complex shape products. It has excellent creep resistance and the product is translucent. Suitable for gaskets, ball valve seats, oil seals, diaphragm pump valves, etc. It has excellent creep resistance and the product is translucent. Suitable for gaskets, ball valve seats, oil seals, diaphragm pump valves, etc.
PTFE+Toner KL-WHE KL-RED KL-BLU KL-YLW KL-BLK KL-ORG Colors include white, red, blue, yellow, black, orange, PTFE powders and granules with various toners. Uses like ordinary PTFE, suitable for products requiring color marking, turning color film, etc.
Glassfiber PTFE+Glassfiber KL-GF Glass fiber PTFE was added. With or without pores, the porosity is smaller, which is suitable for occasions with higher sealing requirements. Good wear resistance, suitable for mechanical applications such as bearings, gaskets, valve seats, gaskets.
PTFE+glass fiber+molybdenum disulfide KL-GF-MS PTFE with glass fiber and molybdenum disulfide added. Good wear resistance, low friction coefficient, suitable for mechanical applications such as bearings and valve seats
PTFE+glass fiber+graphite KL-GF-GR PTFE with glass fiber and graphite added. Good wear resistance, suitable for piston rings, bearings, gaskets, etc.
PTFE+glass fiber+blue toner KL-GF-BLU PTFE filler with glass fiber and blue toner added. Good wear resistance, suitable for mechanical applications such as bearings, gaskets, valve seats, gaskets.
Carbon fiber PTFE+Carbon fiber KL-CF Carbon fiber PTFE is added Good wear resistance, good pressure and bending resistance. Suitable for bearings, mechanical seals, etc.
PTFE+Carbon graphite KL-CF-GR PTFE powder with carbon and graphite added. Good wear resistance, low friction coefficient, suitable for Mechanical applications such as small household appliances bearings Applicable to Mechanical applications such as small household appliances bearings
PTFE+Conductive carbon KL-CC Add conductive carbon PTFE. Suitable for anti-static boards, rods, films, etc.
PTFE+Soft carbon KL-SC Soft carbon PTFE was added. Mechanical properties are better than ordinary toner.
100% modified PTFE + soft carbon KL-MF-SC
Graphite PTFE+Graphite KL-GR Graphite-added PTFE powder Suitable for use in corrosion-resistant environments, in hot water and steam environments, with good thermal conductivity for pharmaceutical applications.
Copper powder PTFE+Copper powder KL-BRE Bronze powder added PTFE It has good heat transfer and is suitable for bearings, engineering machinery seals, machine tool guides, etc.
PTFE+copper powder+carbon fiber+molybdenum disulfide KL-BRE-CF-MO A PTFE powder of bronze, carbon fiber or molybdenum disulfide is added. Has good heat transfer and wear resistance, suitable for bearings, engineering machinery seals, machine tool guides, high temperature globe valves, etc.
PTFE+copper powder+green toner KL-BRE-GRN Bronze powder and green (GRN) PTFE added Has good heat transfer, suitable for bearings, engineering machinery seals, machine guides and so on.
PTFE+copper powder+blue toner KL-BRE-BLU Bronze powder and blue (BLU) PTFE added Has good heat transfer, suitable for bearings, engineering machinery seals, machine guides and so on.
PTFE+copper powder+molybdenum disulfide KL-BRE-MO PTFE with added bronze powder and molybdenum disulfide Has good heat transfer, suitable for bearings, engineering machinery seals, machine guides and so on.
Polyphenyl ester PTFE+Polyphenyl ester KL-PB Polyphenyl ester-added PTFE powder It has high temperature resistance and high dimensional stability at high temperatures, and is suitable for high speed rotary sealing.
Polyimide PTFE+Polyimide PI KL-PI Polyimide PTFE powder Has a low coefficient of friction and is suitable for grinding surfaces Soft metal dry friction environment, high temperature resistance and radiation resistance.
Polyether ether ketone PTFE+Polyether ether ketone PEEK KL-PEK PTFE powder with polyether ether ether ketone added It has a very low coefficient of friction and is suitable for compressor parts, dynamic sealing parts in dry friction environments, such as piston rings, guide rings and so on.
Boron nitride PTFE+boron nitride KL-BN Boron nitride PTFE is added. Suitable for high pressure electrical nozzles
Molybdenum disulfide PTFE + molybdenum disulfide KL-MO PTFE powder added with 0.1% molybdenum disulfide Suitable for high pressure electrical nozzles.
Stainless steel PTFE+Stainless steel KL-STS Added stainless steel PTFE to increase thermal conductivity, reduce cold flow, and resist most chemicals. Meets FDA requirements for food contact applications.
NEED MORE INFORMATION?
Contact Cylex Plastic's corporate headquarters in 5 Carpenter Rd,Edgbaston Birmingham,West Midlands B15 2JT United Kingdom at 0044-7894 685 275 for more specific information.